Page 17 - Workswell Catalogue

Applications

THERMAL INSPECTION SYSTEM 16

Monitoring the
Monitoring the cor-cor- Surface tempera- Temperature mon- Automation
r
rect heating of the ect heating of the ture check when itoring during alu-
windscreeneen
windscr gluing laminate minium soldering

In these times of modern cars, these times of modern cars,
In Gluing laminate on chipboard Soldering is a method of joining
the heating of the rear window heating of the rear window
the under high pressure and at the parts with molten auxiliary ma-
or windscreen is almost standard windscreen is almost standard
or stated temperature is an example terial, the so-called solder with
equipment of each new car. Heat-t of each new car. Heat-
equipmen of using ThermoInspector. Chip- the melting point lower than the
ing
ing is provided by small resistance is provided by small resistance board panels are machined with components to be joined. It is
wir
wires inside each glass. If the wire es inside each glass. If the wire a high-pressure laminate that in- customary to distinguish the so-
is defective, a short circuit occurs defective, a short circuit occurs
is creases the resistance of the work called soft and hard soldering,
in the area. These short circuit are the area. These short circuit are
in boards to wear, moisture and depending on the melting point of
v very well recognisable with a WIC ery well recognisable with a WIC heat. Process of laminate heating the solder.
thermal imaging c
thermal imaging camera.amera. is monitored by thermal camera.

T
Monitoring the cor-emperature check Temperature mon- Printed circuit
rect heating of the when spot laser itoring during con- boards inspection
windscreenwelding plastics tour laser welding by thermal imaging

Plas
In these times of modern cars, tic welding is one of the most Welding of plastic parts is nowa- When designing and producing
the heating of the rear window used technologies in the
widely days a very used technology in the printed circuit boards (PCB), it
or windscreen is almost standard try today to permanently
indus industry for permanent joining is very difficult to discover some
join
equipment of each new car. Heat-parts together. There are sev- parts together. There are several manufacturing defects or design
er
ing is provided by small resistance al plastic welding technologies: types of plastic welding technol- imperfections using traditional
hot
wires inside each glass. If the wire body, hot gas, friction, and ul- ogies: hot body welding, hot gas, optical inspection methods. When
is defective, a short circuit occurs asound and also laser welding.
tr friction and ultrasound but also supplying voltage to any PCB,
in the area. These short circuit are beam welding is good for
Laser laser welding. the electric current starts to flow
very well recognisable with a WIC elding very small plastic parts
w through the PCB and it starts to
bec
thermal imaging camera.ause of the size of the beam. heat up.