Page 29 - Workswell Catalogue
P. 29
USB and GigE Modules
USB3 AND GIGE MODULES FOR FLIR TAU2 SENSORS 28
USB3 and GigE modules are compatible with all FLIR
TAU2 9 Hz/30 Hz sensors (TAU2 640, TAU2 320/336,
TAU2 160/162/168) and enable easy access to sensors
data, their controls, and administration. FLIR TAU2 is
operated and powered via a USB3 or a GigE interface.
The whole internal electronic content is protected by an
aluminium case. Workswell ThermoLab software for ra-
diometrics data streaming is available.
Parameter USB3 Module GigE Module
MAIN FEATURES Interface and Connector USB3 Micro-B Receptacle 1000 Gb/s Ethernet RJ45
GigE
Communication Protocol USB3
Compatible with all TAU 2 Power Supply Power over USB3 (5 V) Power over Ethernet
(PoE), 250 mA maximum
Configuration Software ThermoLab available Power consumption 280 mA maximum, average 150 mA
Operational conditions -10…40 °C, Noncondensing, Industrial version -40 °C to 60 °C
Easy Connection to TAU2 cameras IP Protection IP40
Pixel Depth 8/14 bits RAW data
Metal Enclosure with fixing screws available Pixel Resolution 640 x 512, 336 x 256, 324 x 256, 160 x 128
Tutorial App with Linux &Windows dll Analog Video PAL, NTSC
Serial Command Protocol
Camera Control
Linux for ARM, Labview and Matlab available Module Dimensions 47 x 46 x 48 mm 46 x 48 x 54 mm
Weight 110 g 130 g (enclosured)
Low Power Module Consumption
Automatic TAU2 Recognition POWER SUPPLY
Raw Data or Temperature Output GigE interface is powered directly through the Ether-
Integrated analogue output net cable (PoE) and its very low energy consumption
Powerful measurement tools in ThermoLab lowers the need for special cooling. USB3 version is
NEW Special industrial version available powered through USB cable.
Available to buy module without housing
RADIOMETRIC DATA STREAMING
Workswell ThermoLab software automatically identifies
the USB3 or GigE interface, FLIR TAU2 core type, or a
faulty IP address setting. Depending on the core, the
resolution is set to 8 or 14 RAW data formats. Calibration
USB3 interface is powered directly through the USB3
cable with no need for an additional external source.
Its very low energy consumption lowers the need for a
special cooling.
SDK DEVELOPMENT LIBRARIES
Development libraries (SDK) for Win-
dows and Linux x86 are included in the
USB3 or GigE module delivery packages.
This enables an easy integration and
access to data.
Workswell ThermoLab software is avail-
able for each purchase and can be used
for data analysis or special development
libraries for Labview, Matlab, and Linux
ARM.
