![Homepage [EN]](/media/1554/logo.svg){kind=logo}
Camera types and enclosure
Thermal monitoring, by its very nature, is often carried out in exposed environments, which places high demands on the durability of cameras and accessories. Nextech distributes all cameras and protective enclosures in the SAFETIS range, ensuring that we can offer a thermal monitoring solution for a wide range of industries and scenarios, including monitoring in:
- Areas exposed to rain and dust
- Corrosive environments
- The food industry
- Areas with explosion risk
- Areas with bright sunlight
- Areas with extremely high temperatures
- Areas with extremely low temperatures
SAFETIS – INDOOR
The basic version of the SAFETIS system, designed for indoor environments where the temperature does not drop below 0˚C.
This is the smallest type of camera thanks to its simple and elegant design, which allows it to offer all the functions for early fire detection.
SAFETIS Indoor has IP54 protection (or IP67 with special cover) without the need for any special housing.
SAFETIS Indoor is a fully radiometric thermal camera with high sensitivity to evaluate any change in surface temperature (sensitivity is better than 0.05˚C)
SAFETIS – OUTDOOR
SAFETIS Outdoor is specially designed for rapid detection of the risk of flames before a fire.
It is one of the components of the SAFETIS system, and as mentioned in the name, the SAFETIS Outdoor camera is designed for outdoor installations.
SAFETIS Outdoor is a fully radiometric thermal camera with high sensitivity to evaluate any change in surface temperature (sensitivity is better than 0.05˚C)
SAFETIS – OUTDOOR PAN-TILT
SAFETIS – OUTDOOR PAN-TILT has the same specifications as SAFETIS Outdoor, but with the possibility of panning.
SAFETIS – EX-proof
SAFETIS EX-proof is specially designed for rapid detection of flare-ups. This camera responds to rising temperatures without seeing any flames. One of the components of Workswell’s SAFETIS system, the EX-proof, is built to withstand the high demands of installation in EX areas.
ATEX(EN 60079-0: 2012+A11: 2013, EN 60079-1: 2014, EN 60079-31: 2014):
b II 2G Ex db IIC T6 Gb
b II 2D Ex tb IIIC T85°C Db, Ta -40°C to +60°C
